Netw 310 Week1 Lab

313 Words2 Pages
NETW310, Lab #1, Examine the Physical Layer Lab Report Place the answers below the questions. 1. There are three patterns outlined on the screen which one of these is identifying the noise floor? The topology patten, which is measured by dBm, contains the pattern that shows the noise floor. 2. What is the approximate signal level of the noise floor? 2.4GHz band noise floor is -85db, 5Ghz band noise floor is -100db mark. 3. Of the 11 channels being displayed which ones have the lowest noise floor? Channel 9 and Channel 10 have the lowest noise floors. 4. Inside the circle marked as Pattern 2 is this a signal from one of the three unlicensed fequency ranges? Yes, it is a signal from the three unliscensed frequency ranges. 5. If it is, what type of signal is this, 900 MHz, 2.4GHz, or 5 GHz? The signal operates in the 2.4 GHz frequency. 6. Inside the circle marked as Pattern 3 is this a signal from one of the three unlicensed signal ranges? Yes, it is. Those are the only three signals that are being demonstrated. 7. If it is, what type of signal is this, 900 MHz, 2.4GHz, or 5 GHz? The signal was part of the 900MHz band. 8. In the area marked as Pattern 4 some interference has appeared. What type of interference is this, such as all-channel, co-channel, adjacent-channel? Adjacent Channel Interference which can only occur on a 2.4GHz band. 9. On what channel has this interference appeared on? It looks like channels 4 and 6 seem to have the same patterns. 10. Is this interference weaker than, the same, or stronger than the signal that was there before it appeared? The signal had to be stronger in order to stand out on the chart. So my answer is the

More about Netw 310 Week1 Lab

Open Document