(Choose two answers.) a. Used for short-term memory e. Is installed onto the motherboard 5. This chapter describes the concepts behind how a CPU reads the contents from RAM. Which of the following is true about the process of read data, as described in the chapter?
The Socket AM3 Connector is used with the following processors. Phenom II Athlon II Sempron Opteron 138x Task 3 1. Use the Internet to locate information on the Intel processors listed in the following table. Fill in all the column values. Processor | Clock Speed | Internal Cache | Bus Speed | Architecture | i7 | 3.4 Ghz | 4MB | 5GT/s | Broadwell
The AMD SB710 Southbridge chipset is used with Socket AM3/AM2 Processors, AMD Turion™ II Neo | AMD Athlon™ II Neo Processors (ASB2),AMD Turion™ Neo, AMD Athlon™ Neo and AMD Sempron™ Processors (ASB1). Its purpose on the motherboard is to control the processes that are going on within the computer's main frame system. 3. The Socket AM3 Connector is used with the same AMD SB710 Task 3 procedure 1. PROCESSORS | CLOCK SPEED | INTERAL CACHE | BUS SPEED | ARCHITECTURE | i7 | 2 GHz-3.5GHz | 6MB-8MB | 5GT/s | X86 | i7 mobile | 1.7GHz-2.9GHz | 4MB-8MB | 5GT/s | X86 | i5 | 2.3GHz-3.4GHz | 4MB-6MB | 5GT/s | X86 | i5 mobile | 1.3GHz-2.8GHz | 3MB | 5GT/s | X86 | i3 | 2.9GHz-3.6GHz | 3MB-4MB | 5GT/s | X86 | i3 mobile | 1.3GHz-2.8GHz | 3MB | 5GT/s | X86 | vPro | 2.0GHz-3.6GHz | 4MB-8MB | 2.5GT/s-5GT/s | X86 | vPro mobile | N/A | N/A | N/A | N/A | Xeon 7000 | 1.8GHz-3.5GHz | 2MB-24MB | 666MHz-6.4GT/s | X86 | Xeon 5000 | 1.6GHz-3.7GHz | 4MB-12MB | 666MHz-6.4GT/s | X86 | Xeon 3000 | 1.8GHz-3.4GHz | 2MB-12MV | 1066MHz-6.4GT/s | X86 | Itanium 9000 | 1.4GHz-1.6GHz | 6MB-24MB | 533MHz | X86 | Pentium | 2.2GHz-3.3GHz | 2MB-3MB | 5GT/s | X86 | Celeron | 1.6GHz-2.9GHz | 512KB-2MB | 800MHz-5GT/s | X86 | 2.
(Choose two answers.) a. Used for short-term memory b. Used for long-term memory c. Used to process data d. Connects to the CPU over a bus using a cable e. Is installed onto the motherboard 5. This chapter describes the concepts behind how a CPU reads the contents from RAM.
ATX uses P1 Power and supports both the 20 and 24 pin connectors. Mice and keyboards use either the PS/2 or USB connectors. The memory slots are DIMM. The expansion slots are either PCI or AGP. It also contains 2 IDE connectors and 1 or 2 SATA connectors.
Which of the following is true about the process of read data, as described in the chapter? The CPU tells the RAM which address holds the data that the CPU wants to read. 8. Which of the following is not a feature of a file system that might use with a hard disk drive? An actuator arm 13.
UNIT 1 ASSIGNMENT 1 1) R.A.M- Stands for (random access memory). This is a type of computer memory that can be accessed randomly. RAM is the most common type of memory found in computers and other devices. 2) O.S.-(operating system) is a collection of software that manages computer hardware resources and provides common services for computer programs. The operating system is an essential component of the system software in a computer system.
5. What are the minimum system requirements for Fedora 15 with the GUI installed? The minimum system requirements for Fedora 15 with GUI is: Intel Pentium Pro processor with 400 megahertz. RAM 384-512 mebibytes. Hard disk space can be as little as 90 mebibytes.
3. Provide a comparison table showing the similarities and differences between desktop and notebook computers. Task1: Here are the functions of the each component in the Von Neumann model of the computer Component Function Control unit The control unit will manage the process of moving date and program that data. In modern computers this memory is RAM. Arithmetic logic Unit This part of the architecture is solely involved with carrying out calculations upon the date.
Installing Input and Multimedia Devices. – Install keyboards, mice, webcams, and so on. Troubleshooting Input and Multimedia Devices. – How to troubleshoot the input and multimedia devices. 2 Input/Output Ports Electronic highway to send information to/from: – Processor – Memory Input ports assigned to devices include: – USB – PS/2 keyboard or mouse – Serial – Firewall – Ethernet