Continuity Tester - is an item of electrical test equipment used to determine if an electrical path can be established between two points; that is if an electrical circuit can be made. 13. Category 5e/6 Cable - is a twisted pair cable for carrying signals/ is a standardized cable for Gigabit Ethernet and other network physical layers that is backward compatible with the
D. Connect each device to a centralized LAN switch using UTP cabling. 2. A. connect each device in series using coaxial cabling 3. B. pins 1 and 2 on one end of the cable connect to pins 3 and 6 on the other end of the cable. 4.
What is the WO, and what is its purpose? Workstation or Work Area Outlet – Also called the TO (Telecommunications Outlet), it’s used to connect devices to the cable plant. The cable type typically used is CAT3, CAT5, CAT5e, CAT6, CAT6A, and various coaxial cables. Devices typically connected to these outlets are PCs, printers, servers, phones, televisions,
TCP is the transport layer protocol that links the application layer to the network layer. TCP breaks the data into smaller packets, numbers the packets, ensures each packet is reliably delivered, and puts the packets in the proper order at the destination. IP is the network layer protocol and performs addressing and routing. IP software is used at each of the computers through which the message passes through; IP routes the message to the final destination. TCP/IP is the transport & network layer protocol used on the Internet.
23. What is the purpose of the paging procedure in Bluetooth? Used to establish a and synchronize a connection between 2 Bluetooth devices 24. 25. What are the 3 parameters that define a RFID system?
The vendor of the NIC. 19. INTERNET SEARCH: Find the device manufacturer for the following Ethernet devices: a. 00-C0-4F-49-68-AB Dell. b.
Questions and Answers for Lab #5 1. What is the purpose of address resolution protocol (ARP)? Address resolution protocol converts IP addresses to ethernet addresses. 2. What is the purpose of dynamic host control protocol (DHCP)?
(Choose tow answers.) a. Completes the electrical circuit by looping two wires tighter on its end. And C. Create current on the circuit 4. A PC NIC and a switch port create one electrical circuit to use when sending data from the PC to the switch.
207.1 – Connect To the Internet 06/10/2014 Hayden Scott 1.1 - Identify different types of connection methods that can be used to access the Internet; There is many ways to connect to the internet. Each method has its downfalls and also its advantages. Here are some methods that will allow you access to the internet. * ADSL - Asymmetric digital subscriber line. Connection through traditional phone lines.
12.) Why is an SSD hard drive more reliable under rugged conditions than an IDE hard drive? 13.) How is the best way to determine if a cable inside a computer is a data cable or a power cable? 14.)