Attention Material: Have you ever seen anyone with the cute newspaper print on their nails and wanted to learn how to do it? I’m going to teach you how to do the design for yourself or for someone else. B. Tie to the Audience: A lot of girls like to do their nails, so this would be something that you could do. Guys, this would give you some brownie points with the ladies!
2. Make crayon shavings by sharpening crayons with a crayon sharpener. Use different colored crayons. (These shavings will represent sediments.) You need enough crayon shavings of different colors to have a pile of “sediment” about 6 cm by 6 cm and 1 to 2 cm think.
line – A mark created by a pointed tool such as a pencil, pen, or brush moving across a surface. lithography – A printing process that does not involve engraving. Instead, a crayon or other greasy medium is used to draw on a smooth surface such as a stone or plate. Lithography is based on the fact that grease and water repel one another. medium/media (singular/plural) – The material with which an artist works such as ink, bronze, oil paint, or watercolor.
Gather paper towels, Petri dish, Control dish, blue and green non toxic markers, a timer, and pencil and paper. 3. Colored two paper towels one green the other blue and one was left as original color. (cut paper towels to the size control dish.) 4.
3. Place a dot of ink near the bottom of each strip. Use a pencil to identify which strip belongs to which pen. 4. Poke a pencil through one of the loops you just made.
After doing these two folds, fold the top of the point down three lines of where the opening is. Then fold the point under the opening so you cannot see the point. After step 5, fold the paper in half and evenly so that the left and right side a-line with each other. After folding it in half, fold
Show your working. 3 t + 4 = t + 13 t= 2 marks 2 (3n + 7) = 8 n= 1 mark KS3/03/Ma/Tier 6–8/P1 3 Shapes 2. The drawing shows how shapes A and B fit together to make a right-angled triangle. Work out the size of each of the angles in shape B. Write them in the correct place in shape B below.
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬ Another previous experiment tested termite preference between curvilinear and rectilinear lines. Both types of shapes were drawn using the same writing utensil, and the results showed that termites preferred the curvilinear shape to the rectilinear one. Based on these findings, the shape in this experiment was a circle. Prediction: If we take a black Sharpie™ marker and draw a circle 7.5 cm in diameter on a white paper surface and cover the surface with a plastic 3M Laser Transparency™ sheet, then termites will follow the circular line longer than when the surface is not covered with a plastic 3M Laser Transparency™ sheet. Experimental Design: A sheet of white paper was taken and cut to match an 8 1/2 x 11 inch piece of 3M Laser Transparency™
The method of wood block is prepared as a relief matrix, by cutting the white areas with knifes, chisel or sandpaper. Then you wood ink the block to get a better printing. There were 3 types of printing stamping, rubbing, and
Characterizing the object through proper strokes This is referred to as the bone structure of the painting. The stronger the brush work, the stronger the painting. Character is produced by a combination of strong and lighter strokes, thick and thin, wet and dry. 3. Fidelity to the object in portraying form Chinese painters strive to draw the object as they see it.