Next Step will be to make sample project in IDE. For ATMEL Studio 6 steps for project creation is given in DVD_Drive:\ e-Yantra_Tutorials\Documentation\ 02_Setting_project_AtmelStudio6.pdf You can open any sample project from experiment folder DVD_Drive:\ e-Yantra_Tutorials\ Experiment_ATMEL-Studio-6 Follow all necessary steps as given in the documentation; you would now have generated a “.hex” file which you can load into the microcontroller. 4. You can load the “.hex” file by using Bootloader; steps for installing and using Bootloader is given in DVD_Drive:\ e-Yantra_Tutorials\Documentation\ 03_Installing_and_using_bootloader.pdf 5. Go through seven video tutorial given in DVD_Drive:\ e-Yantra_Tutorials\ Video_Tutorial 6.
This password is stored in _______. BIOS CMOS RAM* DDR RAM the CPU 8. (TCO 3) The term form factor in regards to a motherboard refers to the ______ layout of the components on the board physical logical proposed inverted 9. (TCO 9) When you first purchase a notebook, make sure you have a ____ CD containing the installed OS so you can recover from a failed hard drive development management diagnostic recovery 10. (TCO 9) ____ let you specify which devices are to be loaded on startup for a particular user or set of circumstances Hardware profiles* Folder redirections Briefcase profiles Startup profiles 11.
Projectile Lab Experimental Techniques Finding the Velocity: The first step in this lab was to find the velocity of the projectile launcher. The launcher was set to setting to and attached to the double photo gate. Next, the USB cable was hooked up to the photo gate and plugged into the computer so the data could be retrieved from Data Studio. Finally, the projectile was launched, using the projectile launcher, straight up from the ground and through the double photo gate. The projectile was launched three times and an average velocity was found.
AP Physics C Lab Report i. Purpose: To investigate the relationship in Newton’s Second Law ii. Materials: Pasco track and cart, endstop, pulley, string, washers, lab pro with motion detector, logger pro iii. Procedure: 1. Assemble the materials as shown in the diagram to the left.
The gravity equals Mass times Acceleration, or G=ma. However, extra Gravity can be artificially generated in any direction by sudden changes in the motion of airplane. For instance, when the airplane is taking off, you feel you are pushing back into your seat. This is because the velocity of the airplane changes and exerts acceleration (The Basics of Flight). Lift “How can a heavy metal lift off the ground”?
We used a vernier caliper to obtain the diameter of those two and therefore, the radius. When adding all the numbers together, we found that the true radius(r) of the orbit was 0.139 m. To find our tension, we needed to find out how much weight we needed to pull the object towards away from the spring and on the tip of the pointer as shown below. The tension needed to pull the mass on the tip of the pointer 1.05 kg. In theory the force of acceleration needed to pull the mass to same exact spot should equal the force of tension multiplied by the force due to gravity. Using Newton’s second law, F=ma, we know that the
2- Lateral or Y Axis which is an imaginary line on the Right Hand side and left hand side. 3- Vertical or Z Axis which is an imaginary line in the upward and downward direction. For example: If a lock is described as a XZ lockt, it means that it restrains the movement of the ULD along the X and Z Axis. Equipment installed in the floor of an aircraft cargo compartment to restrain aircraft unit load devices against the ground/flight loads. It usually consists of such items as rollers, side guides and locks for securing unit load devices to the aircraft structure.
The first principle states that if there is no force applied to the gyro, the spin axis of the gyro wheel tends to remain in a fixed direction in space. Precession is the tilting or turning of a gyro in response to a force. For instance, whenever a plane changes direction, small perpendicular force applied to gyro. As result of, the gyro will rotate 90 degrees ahead of that point of force. Gyroscope is being used in almost every vehicle especially in airplane’s instrument such as altitude indicator, heading indicator, and turn coordinator.
This angle affects whether the helicopter will rise, descend, turn, or even hover. Source 2- A helicopter has one or more motor-driven rotors instead of fixed wings. It can take off and land vertically, move in any direction on a lateral plane, or hover in one place. The lift developed by a fixed-wing aircraft's wing depends on two things: the angle of attack of the wing and the velocity of the air in relation to the
IBDP Physics Practice Lab - Factors Affecting the Drop Time of a Falling Body By Clevis Tam Aim: To investigate how the relationship of the terminal velocity of a falling parachute depends on the mass of the clay. Variables: • Independent Variables: The mass of the Clay (g) • Dependent Variables: The time the clay takes to reach the ground (s), The speed of the clay that is processed after collecting data (ms -1) • Controlled Variables: Method of releasing the clay, the area of the parachute Materials / Apparatus: 1. Meter Ruler (0-1m, measures to 0.001m) 2. Electronic Stopwatch (measures to 0.01s) 3. Drop Height (2.56m) 4.