Bus Topology Essay

463 WordsDec 25, 20112 Pages
Bus networks are the simplest way to connect multiple clients, but may have problems when two clients want to transmit at the same time on the same bus. Thus systems which use bus network architectures normally have some scheme of collision handling or collision avoidance for communication on the bus, quite often using Carrier Sense Multiple Access or the presence of a bus master which controls access to the shared bus resource. A true bus network is passive[disambiguation needed ] –a host computer has one or two LANCARD in bus topology for connect the network. the computers on the bus simply listen for a signal; they are not responsible for moving the signal along. However, many active architectures can also be described as a "bus", as they provide the same logical functions as a passive bus; for example, switched Ethernet can still be regarded as a logical network, if not a physical one. Indeed, the hardware may be abstracted away completely in the case of a software bus. With the dominance of switched Ethernet over passive Ethernet, passive bus networks are uncommon in wired networks. However, almost all current wireless networks can be viewed as examples of passive bus networks, with radio propagation serving as the shared passive medium. The bus topology makes the addition of new devices straightforward. The term used to describe clients is station or workstation in this type of network. Bus network topology uses a broadcast channel which means that all attached stations can hear every transmission and all stations have equal priority in using the network to transmit[1] data. The Ethernet bus topology works like a big telephone party line — before any device can send a packet, devices on the bus must first determine that no other device is sending a packet on the cable. When a device sends its packet out over the bus, every other network card on the bus sees

More about Bus Topology Essay

Open Document